Accessories
فوریه 2, 2020
Safety
فوریه 2, 2020

 

Teleservice: Teleservice

As demonstrated by numerous studies, up to 70% of the maintenance costs can be saved by preventive maintenance. A useful tool for this is the teleservice that enables a continuous monitoring and maintenance of the systems. For this reason with the VIPA teleservice modules we offer a modern and intelligent kind of teleservice for the different types of transmission. Whether on the conventional way via analog or ISDN line or via broadband connections as ADSL and HSUPA (mobile communications) VIPA offers here the complete product range on teleservice modules too. The communication to your automatization modules is established by MPI or PROFIBUS or via the Ethernet interface, which belongs to each of our devices as standard. The configuration of the VIPA teleservice modules is performed via a web browser. Additional software or the like is not required

Beside the robust hardware, which shines with the usual VIPA interface variety, VIPA offers also a free service called Talk2M. Via this service you are able to establish a save connection to your construction within seconds, regardless of whether they are communicating via mobile phone or a line

Teleservice of controllers, HMIs, frequency converters, roboters, IPCs etc. are not an impossible challenge for us. With the VIPA Teleservice modules, you have a perfectly balanced combination of hardware and software


Order no. Name/Description

900-0AB51

TM antenna GSM/UMTS

Mobile antenna incl. 5 m cable
SMA connector
Resistance: 50 Ohm
Power: 10 W
Gain: 2.14 dBi
900/1800 MHz

900-2C510

VIPA TM-C VPN Router WAN/LAN

For remote access via Talk2M VPN
4x RJ45 LAN 100 mbit/s (integrated switch, configurable LAN/WAN)
2x digital input for internet / VPN-access
1x digital output for Talk2M connection
Integrated web interface for configuration
SD card slot
USB interface for connection serial devices
[Datasheet]


[Manual]


900-2C520

VIPA TM-C VPN Router WIFI/WAN/LAN

For remote access via Talk2M VPN
WIFI CLIENT for connection at a WIFI network (WAN)
4x RJ45 LAN 100 Mbit/s (integrated switch, configurable LAN/WAN)
2x digital input for internet / VPN-access
1x digital output for Talk2M connection
Integrated web interface for configuration
SD card slot
USB interface for connection serial devices
Including WIFI antenna
[Datasheet]


[Manual]


900-2C580

VIPA TM-C VPN Router 3G+/WAN/LAN

For remote access via Talk2M VPN, 3G+ modem for connection at a mobile network (WAN)
4x RJ45 LAN 100 mbit/s (integrated switch, configurable LAN/WAN)
2x digital input for internet / VPN-access
1x digital output for Talk 2M connection
Integrated web interface for configuration
SD card slot
USB interface for connection serial devices
Please order the antenna separately (900-0AB51)
[Datasheet]


[Manual]


900-2C610

VIPA TM-C VPN Router WAN/LAN/MPI

For remote access via Talk2M VPN
4x RJ45 LAN 100 Mbit/s
4x RJ45 switch LAN
1x RJ45 WAN
1x SUB-D 9pin MPI/PROFIBUS up to 12 Mbit/s
1x digital input and output
[Datasheet]


[Manual]


EC51460

Cosy 141 MPI

Ethernet to Serial Gateways: MODBUS TCP to MODBUS RTU; XIP to UNITELWAY;
EtherNet/IP™ to DF1; FINS TCP to FINS Hostlink;
ISO TCP to PPI, MPI (S7) or PROFIBUS (S7); VCOM to ASCII
Router: IP filtering, IP forwarding, NAT, Port forwarding, Proxy, Routing table, DHCP client,
Internet: Outbound connection to Talk2M using HTTPS (port 443 or UDP 1193)
VPN Tunnelling: Open VPN either in SSL UDP or HTTPS;
VPN Security:end-to-end encrypted using SSL/TLS
TalK2M: Talk2M Free+ or TalK2M Pro, natively supported
Mechanicals: Din Rail Mounting;
Dimensions : 129(Height) x 108(Depth) x 39(Width) mm; Weight : <500gr;
Electrical (common): Power supply 12 – 24VDC +/-20%, SELV
Temperature range: Operating: -20°C to +70°C, 10 to 95% relative humidity (non condensing)
Storage: -40°C to +70°C, 10 to 95% relative humidity (non-condensing)
Hardware: 1x SUBD9 MPI/Profibus port isolated (12Mbits)
1x RJ45 WAN Ethernet 10/100 base Tx; 1,5kV isolation
4 x RJ45 LAN Ethernet 10/100 base Tx (integrated Switch); 1,5kV isolation
1x digital input: 0/24VDC; 1,5kV isolation
1x digital output: open drain (MOSFET) 200mA@30VDC; 1,5 kV isolation
Certifications: CE, cCSAus
Warranty: 18 months
[Datasheet]


[Manual]


EC61330

Cosy 131 Eth. Router

WAN Ethernet: Up to 3 ports, 10/100 Mb Ethernet; LAN Ethernet: Up to 4 ports, 10/100Mb Ethernet
Field interface: Up to 10 USB 2.0 connections, female connector 2.0
SD card reader: YES, for Cosy commissioning (firmware upgrade, backup, Talk2M registration)
Router: IP filtering, IP forwarding, NAT, Port forwarding, Proxy, Routing table, DHCP client/server
Internet: Outbound connection for Talk2M using HTTPS (port 443 or UDP 1194)
VPN Tunnelling: Open VPN either in SSL UDP or HTTPS; VPN Security:end-to-end encrypted using SSL/TLS
TalK2M: Talk2M Free+ or TalK2M Pro, natively supported
Mechanicals: Dimensions: 108 x 99 x 42 mm (H x D x W); Weight: 191 gr; DIN rail or wall screw fixing system
Power supply: 12-24 VDC +/-20%, LPS
Extended Temperature Range; Operating: -25°C to +70°C, 10 to 95% relative humidity (non-condensing)
Storage: -40°C to +70°C, 10 to 95% relative humidity (non-condensing)
Hardware: 1xDO: open drain ( MOSFET) 200mA; isolation 1.5kV, 2xDI: 0 to 24VDC; 1.5 kV isolation
Marking: CE, cULus listed, FCC
Warranty: 36 months
[Datasheet]


[Manual]


EC6133C

Cosy 131 WIFI Router

WAN Ethernet: Up to 3 ports, 10/100 Mb Ethernet; LAN Ethernet: Up to 4 ports, 10/100Mb Ethernet
Field interface: Up to 10 USB 2.0 connections, female connector 2.0
SD card reader: YES, for Cosy commissioning (firmware upgrade, backup, Talk2M registration)
Router: IP filtering, IP forwarding, NAT, Port forwarding, Proxy, Routing table, DHCP client/server
Internet: Outbound connection for Talk2M using HTTPS (port 443 or UDP 1194)
VPN Tunnelling: Open VPN either in SSL UDP or HTTPS; VPN Security:end-to-end encrypted using SSL/TLS
TalK2M: Talk2M Free+ or TalK2M Pro, natively supported
Mechanicals: Dimensions: 108 x 99 x 42 mm (H x D x W); DIN rail or wall screw fixing system
Power supply: 12-24 VDC +/-20%, LPS
Extended Temperature Range; Operating: -25°C to +70°C, 10 to 95% relative humidity (non-condensing)
Storage: -40°C to +70°C, 10 to 95% relative humidity (non-condensing)
Hardware: 1xDO: open drain ( MOSFET) 200mA; isolation 1.5kV, 2xDI: 0 to 24VDC; 1.5 kV isolation
Marking: CE, cULus listed, FCC
Warranty: 36 months
WIFI-Features:
WAN Connectivity: Ethernet or WiFi 802.11 b/g/n
Frequencies: Channels: 1 to 11(inclusive)
Security: WPA2, WPA and WEP
Antenna Connector: RP-SMA female connector
Antenna: Included in the delivery; frequency: 2.4GHz; impedance: 50 Ohms; gain: 2.0dBi
Weight: 199 gr
[Datasheet]


[Manual]


EC6133D

Cosy 131 3G+ Router

WAN Ethernet: Up to 3 ports, 10/100 Mb Ethernet; LAN Ethernet: Up to 4 ports, 10/100Mb Ethernet
Field interface: Up to 10 USB 2.0 connections, female connector 2.0
SD card reader: YES, for Cosy commissioning (firmware upgrade, backup, Talk2M registration)
Router: IP filtering, IP forwarding, NAT, Port forwarding, Proxy, Routing table, DHCP client/server
Internet: Outbound connection for Talk2M using HTTPS (port 443 or UDP 1194)
VPN Tunnelling: Open VPN either in SSL UDP or HTTPS; VPN Security:end-to-end encrypted using SSL/TLS
TalK2M: Talk2M Free+ or TalK2M Pro, natively supported
Mechanicals: Dimensions: 108 x 99 x 42 mm (H x D x W); DIN rail or wall screw fixing system
Power supply: 12-24 VDC +/-20%, LPS
Extended Temperature Range; Operating: -25°C to +70°C, 10 to 95% relative humidity (non-condensing)
Storage: -40°C to +70°C, 10 to 95% relative humidity (non-condensing)
Hardware: 1xDO: open drain ( MOSFET) 200mA; isolation 1.5kV, 2xDI: 0 to 24VDC; 1.5 kV isolation
Marking: CE, cULus listed, FCC
Warranty: 36 months
Cellular 3G+ Features:
Frequencies: GSM/GPRS/EDGE Quad-Band (850, 900, 1800, 1900 MHz) – HSPA+ UMTS Pentaband module (800/850, 900, AWS 1700, 1900, 2100 MHz)
Antenna Connector: Type SMA – Female
Antenna: not included in the delivery
Weight: 202 gr
[Datasheet]


[Manual]


EC6133G

Cosy 131 4G EU Router

WAN Ethernet: Up to 3 ports, 10/100 Mb Ethernet; LAN Ethernet: Up to 4 ports, 10/100Mb Ethernet
Field interface: Up to 10 USB 2.0 connections, female connector 2.0
SD card reader: YES, for Cosy commissioning (firmware upgrade, backup, Talk2M registration)
Router: IP filtering, IP forwarding, NAT, Port forwarding, Proxy, Routing table, DHCP client/server
Internet: Outbound connection for Talk2M using HTTPS (port 443 or UDP 1194)
VPN Tunnelling: Open VPN either in SSL UDP or HTTPS; VPN Security:end-to-end encrypted using SSL/TLS
TalK2M: Talk2M Free+ or TalK2M Pro, natively supported
Mechanicals: Dimensions: 108 x 99 x 42 mm (H x D x W); DIN rail or wall screw fixing system
Power supply: 12-24 VDC +/-20%, LPS
Extended Temperature Range; Operating: -25°C to +70°C, 10 to 95% relative humidity (non-condensing)
Storage: -40°C to +70°C, 10 to 95% relative humidity (non-condensing)
Hardware: 1xDO: open drain ( MOSFET) 200mA; isolation 1.5kV, 2xDI: 0 to 24VDC; 1.5 kV isolation
Marking: CE, cULus listed, FCC
Warranty: 36 months
Cellular 4G EU Features:
Bands: 4G: B1, B3, B7, B8, B20; 3G: B1, B8; Automatic fallback to 3G
Antenna Connector: Type SMA – Female
Antenna: not included in the delivery
Weight: 202 gr
[Datasheet]


[Manual]


FLA3301

Flexy Option

1x male SUBD9 serial port RS232/422/485 configurable by dipswitch and
1x male SUBD9 RS232 serial port with RTS, CTS signals
[Manual]


FLB3202

Flexy Option Cellular 3G+

Pentaband UMTS/HSPA+ modem (800/850, 900, AWS1700, 1900, 2100 MHz)
Quad band GPRS/EDGE (850, 900, 1800, 1900 MHz)
Type SMA – Female   — Antenna NOT included
[Manual]


FLB3203

Flexy Option VERIZON 4G LTE

only Verizon network compatible, no CDMA
4G: B4(AWS1700), B13(700) MHz
Type SMA – Female   — Antenna NOT included
[Manual]


FLB3204

Flexy Option EU 4G LTE

4G: B7(2600), B1(2100), B3(1800), B8(900), B20 (800)MHz
3G: B1 (2100), B8 (900) MHz
2G: B3 (1800) , B8(900) MHz
Type SMA – Female   — Antenna NOT included
[Manual]


FLB3205

Flexy Option North America 4G LTE

AT&T compliant
4G: B12/B17(700),B5(850), B4(AWS1700),B2(1900), B13(700)MHz
3G: B2(1900), B5(850)MHz
Type SMA – Female   — Antenna NOT included
[Manual]


FLB3271

Flexy Option WIFI

WiFi: 802.11 b/g/n WiFi/WLAN client for remote connection
Channels: 1 to 11 ( inclusive ) WPA2, WPA and WEP
Reverse SMA male connector, Antenna included in the delivery;
frequency: 2.4 GHz; impedance: 50 Ohms, gain:2.0 dB
[Manual]


FLB3601

Flexy Option 3 USB Ports Card

4 leds : 1 global status, 1 for each port status
Type A female, Each port has its own 500mA current limit.
Global current limit on the board is 500mA.
All ports will be enabled/disabled together.
Isolation: Earth GND isolation is limited to 500V due to USB connector design.
[Manual]


FLC3701

Flexy Option MPI / PB

1 x female SUBD9 MPI port, 1.5kV functional isolation from power supply
[Manual]


Flexy20500

Flexy IOT Router

Flexy 205 base module interfaces:
4 x RJ45 Ethernet 10/100 Mb. Configurable LAN/WAN ports, port 1 always LAN
Alarms: Alarms notification by email, SMS, FTP put and/or SNMP traps.
Datalogging: Internal data base for data logging
SD card reader: YES, for easy commissioning (firmware upgrade, backup, Talk2M registration).
Router: IP filtering, IP forwarding, NAT, Port forwarding, Proxy, Routing table, DHCP client/server
VPN Tunnelling: Open VPN either in SSL UDP or HTTPS; VPN Security:end-to-end encrypted using SSL/TLS
User Flash Disk: up to 30MB available for user application
Mechanicals: Din Rail or wall screw fixing system, Dimensions: 133 x 122 x 55 mm (H x D x W );
Weight: 280 g without extension card;
Power supply: 12 – 24VDC +/-20%, LPS;
Consumption: depending on the extension card installed
Input/output: 2x digital input: 0 to 12/24VDC;
1.5kV isolation, 1x digital output: open drain (MOSFET) 200mA; 1.5 kV isolation
[Datasheet]


[Manual]


FLX3101

Flexy Option Ethernet WAN

1x RJ45 Ethernet 10/100 base Tx; 1.5kV isolation
[Manual]


FLX3402

Flexy Option Extension I/O card

I/O card with 8x DI, 2x DO, 4x AI (0-10V, 4-20mA)
Range:
AI : voltage mode 0-10V – 16 bit resolution or current mode 4-20mA, user selectable with Dip Switch configuration.
DI : 0 to 12/24 VDC,DO: 2A/30V VAC/VDC
Isolation:
AI: 1.5kV from power supply
DI: 1.5 kV from electronic AND power supply
DO: 1.5kV from electronic AND from power supply
[Manual]